04/24/2024 1:01 a.m.
https://cablematic.com/en/products/exhaust-fan-extractor-fan-335x335-mm-with-non-return-system-for-wc-bathroom-kitchen-storage-room-garage-KH364/
Exhaust fan, Extractor fan, 335X335 mm, with non-return system for WC bathroom kitchen storage room garage
REF: KH364
Specifications
  • Extractor and air fan with copper coil motor. Appropriate to be installed in closed rooms, storage rooms, toilets, garages, toilets, bathrooms, warehouses, etc. Ideal for removing smoke, odors and humidity.
  • Made of PP plastic. Protection: IP44. Class II electrical protection.
  • It has a non-return valve to block the air inlet from the outside, when the extractor is in operation the valve opens with pressure and when the device is off it prevents air flow.
  • Air extractor with a noise level of 48 db.
  • Voltage: 110, 220-240 VAC / 50-60 Hz. Power: 40 W. Revolutions per minute: 1160.
play_button Watch video
More info
PVP
24.57
Price including VAT: 24.57
PVD
21.70
2 years
warranty
14 days
returns
100%
safe

Out of stock

We will notify you when it is back in stock.
More info
Specifications
  • Extractor and air fan with copper coil motor. Appropriate to be installed in closed rooms, storage rooms, toilets, garages, toilets, bathrooms, warehouses, etc. Ideal for removing smoke, odors and humidity.
  • Made of PP plastic. Protection: IP44. Class II electrical protection.
  • It has a non-return valve to block the air inlet from the outside, when the extractor is in operation the valve opens with pressure and when the device is off it prevents air flow.
  • Air extractor with a noise level of 48 db.
  • Voltage: 110, 220-240 VAC / 50-60 Hz. Power: 40 W. Revolutions per minute: 1160.

More info

Extractor with a single-phase motor that forces air and bad odors out of a room that lacks good ventilation. Axial extractor fan model to embed in the wall or in the ceiling, uses a non-return system of louvers that expels all the air from the rear and blocks the air inlet from the outside when it is not in operation. Ideal to install in closed rooms, bathrooms, sinks, gyms, kitchens, etc.

specs
  • Extractor and air fan with copper coil motor. Appropriate to be installed in closed rooms, storage rooms, toilets, garages, toilets, bathrooms, warehouses, etc. Ideal for removing smoke, odors and humidity.
  • Made of PP plastic. Protection: IP44. Class II electrical protection.
  • It has a non-return valve to block the air inlet from the outside, when the extractor is in operation the valve opens with pressure and when the device is off it prevents air flow.
  • Air extractor with a noise level of 48 db.
  • Voltage: 110, 220-240 VAC / 50-60 Hz. Power: 40 W. Revolutions per minute: 1160.
  • For its installation requires making a square hole in the wall or ceiling. Drilling size: 335x335mm.
  • High suction power with an air flow of 1080 m³ / hour that allows proper ventilation, keeping the cabin cool and ventilated.
  • Size: 390 x 390 x 142 mm.
  • Gross Weight: 2.285 kg
  • Product size (width x depth x height): 39.0 x 14.2 x 39.0 cm
  • Number of packages: 1
  • Packages size: 40.6 x 40.0 x 16.3 cm
  • Master-pack: 1

Videos

play_button Watch video

Technical terms

  • Minijack 3.5
  • Hz
  • Single-phase
  • IP44
  • IP Protection
  • VAC
Minijack 3.5
The minijack 3.5mm is a popular connector used primarily for headphones although its functionality is much more varied.

It consists of a maximum of three connecting parts being the largest so-called mass or negative polarity and two of smaller size and located farther end of the connector, called living or positive that correspond to each channel, such three-part plug can transmit signals in two different channels, also known as stereo signals. It also exists in a mono minijack but version composed of only two parts, a body and a living or positive.

Do you have any question about this product?