03/29/2024 3:43 p.m.
https://cablematic.com/en/products/passive-video-transceiver-bnc-to-terminal-block-dc-data-ttp111vpd-SI010/
Passive Video Transceiver BNC to Terminal Block DC DATA TTP111VPD
REF: SI010
Specifications
  • Video balun and passive video transceiver.
  • Small module size: 69 x 25 x 22 mm.
  • On the side of the camera it has BNC-Male connector, DC connector for video camera power supply and 2-wire cable for data transmission (RS-232 or RS-485).
  • Cable length: 25cm.
  • It is connected to a twisted pair cable and has a 6-Terminal Terminal Block.
More info
PVP 13.37
2.67
Price including VAT: 2.67
PVD 11.75
2.35
Shipping costs: 30,75 *
GB-SE1 1ES
2 years
warranty
14 days
returns
OUTLET

In stock
Only 1 units

More info
Specifications
  • Video balun and passive video transceiver.
  • Small module size: 69 x 25 x 22 mm.
  • On the side of the camera it has BNC-Male connector, DC connector for video camera power supply and 2-wire cable for data transmission (RS-232 or RS-485).
  • Cable length: 25cm.
  • It is connected to a twisted pair cable and has a 6-Terminal Terminal Block.

Keywords

Did not find what you were looking for? These topic could help you

More info

Transceiver of passive video ( video transceiver ) of composite video (coaxial BNC-Male) to twisted pair cable (Teminal Block of 6 Bornes). It performs the functions of video balun. Designed to allow the transmission of video signals through twisted pair cable (UTP). Twisted pair cable facilitates installation, is more economical and allows greater transmission distances without loss of quality.

Specifications
  • Video balun and passive video transceiver.
  • Small module size: 69 x 25 x 22 mm.
  • On the side of the camera it has BNC-Male connector, DC connector for video camera power supply and 2-wire cable for data transmission (RS-232 or RS-485).
  • Cable length: 25cm.
  • It is connected to a twisted pair cable and has a 6-Terminal Terminal Block.
  • Does not require food(passive).
  • Transmission range through UTP cable: 400m (color) and 600m (B/N).
  • It allows to transmit DC power and video signal (maximum 50m).
  • The power is transmitted by 2 pairs of the UTP cable.
  • It can be used together with another module of the same model or with the model #SI25.
  • Gross Weight: 80 g
  • Product size (width x depth x height): 5.4 x 2.4 x 2.0 cm
  • Number of packages: 1
  • Packages size: 11.0 x 12.0 x 4.0 cm

Technical terms

  • Types of network cables (UTP, FTP, STP)
  • BNC
  • Communication Series
  • RS485
  • CVBS
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

Do you have any question about this product?