04/12/2021 5:51 p.m.
https://cablematic.com/en/products/repeater-with-gsm-900mhz-80db-amplifier-with-antennas-and-5m-cable-GW001/
https://cablematic.com/en/products/repeater-with-gsm-900mhz-80db-amplifier-with-antennas-and-5m-cable-GW001/
Repeater with GSM 900MHz 80dB amplifier with antennas and 5m cable
REF: GW001
Specifications
- Content: Outdoor yagi antenna with 5m cable, indoor omnidirectional antenna, GSM signal repeater / amplifier, 5 VDC power supply (3A), and necessary hardware.
- Operating frequency downlink: 935 - 960 MHz. Operating frequency uplink: 890 - 915 MHz.
- Maximum output power: 24 dBm (downlink) and 27 dBm (uplink). Maximum gain: 80 dB ± 3 dB (downlink) and 75 dB ± 3 dB (uplink). Characteristic impedance: 50 Ohm. VSWR: <1: 2.
- Repeater mounted on metal casing of size 240 x 112 x 25 mm. Repeater with two N-female connectors (indoor / outdoor).
- Adjustable omnidirectional inner antenna (180 mm), with N-male connector. It connects directly to the repeater.
Your price
PVP
€137.64
Price including VAT: €137.64
PVD
€119.88
Why different prices? Which one is mine?
Check rate type
Buy
before:
before:
Receive
your product:
your product:
Monday 19
Specifications
- Content: Outdoor yagi antenna with 5m cable, indoor omnidirectional antenna, GSM signal repeater / amplifier, 5 VDC power supply (3A), and necessary hardware.
- Operating frequency downlink: 935 - 960 MHz. Operating frequency uplink: 890 - 915 MHz.
- Maximum output power: 24 dBm (downlink) and 27 dBm (uplink). Maximum gain: 80 dB ± 3 dB (downlink) and 75 dB ± 3 dB (uplink). Characteristic impedance: 50 Ohm. VSWR: <1: 2.
- Repeater mounted on metal casing of size 240 x 112 x 25 mm. Repeater with two N-female connectors (indoor / outdoor).
- Adjustable omnidirectional inner antenna (180 mm), with N-male connector. It connects directly to the repeater.
Keywords
Did not find what you were looking for? These topic could help you
More info
GSM signal repeater in the frequency 900Mhz. The frequency of 900MHz is used in GSM mobile telephony for digital voice transmission. Ideal to increase the quality of the mobile phone signal, in environments where quality is lacking. The typical installation could be an indoor room (poor signal quality), where the GSM repeater is placed, while the receiving antenna (good signal quality) is placed outside.
Specifications
Specifications
- Content: Outdoor yagi antenna with 5m cable, indoor omnidirectional antenna, GSM signal repeater / amplifier, 5 VDC power supply (3A), and necessary hardware.
- Operating frequency downlink: 935 - 960 MHz. Operating frequency uplink: 890 - 915 MHz.
- Maximum output power: 24 dBm (downlink) and 27 dBm (uplink). Maximum gain: 80 dB ± 3 dB (downlink) and 75 dB ± 3 dB (uplink). Characteristic impedance: 50 Ohm. VSWR: <1: 2.
- Repeater mounted on metal casing of size 240 x 112 x 25 mm. Repeater with two N-female connectors (indoor / outdoor).
- Adjustable omnidirectional inner antenna (180 mm), with N-male connector. It connects directly to the repeater.
- Yagi external antenna (440 mm) with wall fixing system or tubular pole. It has a 5m coaxial cable terminated in N-male connector, which connects directly to the repeater.
- The yagi antenna is installed outdoors to capture the GSM signal where there is coverage. The repeater and the omnidirectional antenna are installed inside, to increase the quality of the GSM signal, and offer coverage.
- Possibility of acquiring coaxial cable to extend the length of the cable (# GW3x and adapter # WH83).
- Gross Weight: 2.016 kg
- Product size (width x depth x height): 49.0 x 20.0 x 16.0 cm
- Number of packages: 1
- Packages size: 16.0 x 19.5 x 14.5 cm
- Master-pack: 10
Technical terms
- Impedance Ω
- Hz
- GSM
- dBm
- dBm
- VDC
Impedance Ω
The impedance (Z) is a measure of opposition that a circuit to a current when a voltage is applied. The impedance extends the concept of resistance circuits alternating current (AC), and has both magnitude and phase, unlike resistance, which has only magnitude. When a circuit is powered with direct current (DC), there is no distinction between the impedance and resistance; the latter can be thought csa impedance with zero phase angle.