12/24/2024 2:59 a.m.
https://cablematic.com/en/products/utp-digital-audio-extender-sender-and-receiver-cat5-ae01d-SH004/
UTP Digital Audio Extender sender and receiver Cat.5 AE01D
REF: SH004
Specifications
  • Modules that have RCA-Male connector to Terminal Block (2 terminals).
  • Allows to use Cat.5 UTP cable for transmission ofudio to 180 m.
  • Use only 1 pair (2-wire) of a UTP cable.
  • RCA connectors bathed in gold.
  • Audio input impedance: 1.0Vp-p, 75 Ohms.
More info
PVP
26.30
Price including VAT: 26.30
PVD
22.51
Shipping costs: 0,00 *
GB-SE1 1ES
Delivery times are approximate. Cablematic is not responsible for delays.
2 years
warranty
14 days
returns
100%
safe

In stock
Only 1 units

More info
Specifications
  • Modules that have RCA-Male connector to Terminal Block (2 terminals).
  • Allows to use Cat.5 UTP cable for transmission ofudio to 180 m.
  • Use only 1 pair (2-wire) of a UTP cable.
  • RCA connectors bathed in gold.
  • Audio input impedance: 1.0Vp-p, 75 Ohms.

Keywords

Did not find what you were looking for? These topic could help you

More info

Digital audio transmitter (Dolby Digital and DTS) through Cat.5 UTP cable (uses only one pair). It is a kit composed of two small modules that are interconnected by UTP Cat.5 cable (2-wire) and allow a distance between them of up to 180 m.


Specifications
  • Modules that have RCA-Male connector to Terminal Block (2 terminals).
  • Allows to use Cat.5 UTP cable for transmission ofudio to 180 m.
  • Use only 1 pair (2-wire) of a UTP cable.
  • RCA connectors bathed in gold.
  • Audio input impedance: 1.0Vp-p, 75 Ohms.
  • Size: 48 x 15 x 15 mm.
  • Weight: 15 g
  • Gross Weight: 30 g
  • Product size (width x depth x height): 4.9 x 1.5 x 1.5 cm
  • Number of packages: 1
  • Packages size: 7.5 x 3.8 x 2.6 cm

Technical terms

  • Types of network cables (UTP, FTP, STP)
  • Impedance
  • Categories network cables
  • RCA
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

Do you have any question about this product?