12/24/2024 1:19 a.m.
https://cablematic.com/en/products/control-box-with-22-momentary-push-button-switch-by-cob-series-70x65x230mm-TG085/
https://cablematic.com/en/products/control-box-with-22-momentary-push-button-switch-by-cob-series-70x65x230mm-TG085/
Control box with 2+2 momentary push button switch by COB series 70x65x230mm
Control box with 2+2 momentary push button switch by COB series 70x65x230mm
REF: TG085
Specifications
- Aerial box made of yellow ABS plastic, from the COB series. It has hook to hang.
- It has two groups of two momentary pushbuttons of the non-exclusive type (when one is pressed, the other can not be pressed).
- Push buttons with lid, which allow to be configured, each with its specific function.
- Flexible tube stuffing box on one side, for entry/exitcable. Waterproof and resistant to industrial environments.
- External size of the box (width x depth x height): 70 x 65 x 230 mm.
Watch video
PVP
€24.79
Price including VAT:
€24.79
PVD
€20.76
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
Buy before:
Receive it:
Monday 30
Delivery times are approximate. Cablematic is not responsible for delays.
2 yearswarranty
14 daysreturns
100%safe
Specifications
- Aerial box made of yellow ABS plastic, from the COB series. It has hook to hang.
- It has two groups of two momentary pushbuttons of the non-exclusive type (when one is pressed, the other can not be pressed).
- Push buttons with lid, which allow to be configured, each with its specific function.
- Flexible tube stuffing box on one side, for entry/exitcable. Waterproof and resistant to industrial environments.
- External size of the box (width x depth x height): 70 x 65 x 230 mm.
Related products
Keywords
Did not find what you were looking for? These topic could help you
More info
Aerial box, for controls, push buttons and switches, based on 22 mm diameter perforations. Plastic box designed for aerial use as a portable control center. Pushbuttons and switches, for industrial controls, automation control, cranes, hoists, machines, robots, shutters, etc. The user can configure the automation control box, according to the needs of each installation.
Specifications
Specifications
- Aerial box made of yellow ABS plastic, from the COB series. It has hook to hang.
- It has two groups of two momentary pushbuttons of the non-exclusive type (when one is pressed, the other can not be pressed).
- Push buttons with lid, which allow to be configured, each with its specific function.
- Flexible tube stuffing box on one side, for entry/exitcable. Waterproof and resistant to industrial environments.
- External size of the box (width x depth x height): 70 x 65 x 230 mm.
- Ideal as control centers for electrical automatisms, in industrial environments, cranes, blinds, machines, robots, hoists, etc.
- Gross Weight: 640 g
- Product size (width x depth x height): 6.5 x 7.0 x 23.0 cm
- Number of packages: 1
- Packages size: 24.0 x 10.0 x 7.0 cm
- Master-pack: 1
Technical terms
- LED COB
- ABS
LED COB
The COB Led (chip on board) is a plate (A) with a concentration of LEDs in the form of matrix (B) covered with a special silicone.
This type of led due to its design and installation allow to dissipate in a more efficient way the heat generated by the lighting.
It must be taken into account that the heat is generated in the opposite direction to the light and a low dissipation will cause the led to work in less optimal conditions.thus, its useful life.
Thanks to this design the Led COB is designed to work for long hours.
Its beam of light is multidirectional, so it is a type of diffuse light without dazzling at a point, achieving up to 160 º opening light and have a superior performance to the type of LED SMD.
Its manufacturing cost is 20% lower than an SMD led and its technology offers a reproducible indexchromatic ion (CRI) much higher, getting a better appreciation of colors.
In short, the COB LEDs can produce more lumens using much less energy than the rest of the LED technologies.
This type of led due to its design and installation allow to dissipate in a more efficient way the heat generated by the lighting.
It must be taken into account that the heat is generated in the opposite direction to the light and a low dissipation will cause the led to work in less optimal conditions.thus, its useful life.
Thanks to this design the Led COB is designed to work for long hours.
Its beam of light is multidirectional, so it is a type of diffuse light without dazzling at a point, achieving up to 160 º opening light and have a superior performance to the type of LED SMD.
Its manufacturing cost is 20% lower than an SMD led and its technology offers a reproducible indexchromatic ion (CRI) much higher, getting a better appreciation of colors.
In short, the COB LEDs can produce more lumens using much less energy than the rest of the LED technologies.
