The external load cell dynamometer offers a perfect solution for measuring compressive forces in hard-to-reach environments. The device is small in size and has threaded holes at the bottom for fixed mounting. It has a measurement rate of up to 1600 Hz, which allows obtaining results in real time. The sampled values are presented on the screen as a momentary value and as a graphic curve. The data can be stored in the internal memory or transferred in real time to a computer via the USB interface, with a maximum measurement rate of 800 Hz. The software is provided with the product. In addition, it has the PEAK HOLD function to freeze the peak value until it is exceeded or deleted. Users can also set two limit values for continuous comparison with the current measurement value. If these values are exceeded, the display will emit a signal and can be used in combination with an external controller. Manufactured by PCE with reference PCE-DFG NF 5K.

Specifications

• Digital dynamometer with external load cell, USB interface and software to measure compression forces in hard-to-reach places.
• Compression load cell connected to the dynamometer via a cable of approx. 3m.
• Reduced load cell dimensions for use in many applications.
• Measurement rate up to 1600 Hz.
• Sampled values presented in real time as a momentary value and as a graphical curve on the dynamometer screen.
• Possibility of saving the values in the internal memory or transferring them in real time via the USB interface to a computer with a maximum measurement rate of 800 Hz.
• PEAK HOLD functionality to freeze the peak value on the dyno display until it is exceeded or cleared.
• Setting of two limit values to compare the current measured value and output a signal if they are exceeded.
• External interface for use in combination with a machine controller.

• Gross Weight: 1.805 kg
• Number of packages: 1
• Master-pack: 1