12/23/2024 3:01 p.m.
https://cablematic.com/en/products/multi-modular-cable-tester-network-CT007/
Multi Modular Cable Tester Network
REF: CT007
Specifications
  • UTP network cable and coaxial cable tester, which also detects the pin-out of the cables.
  • Allows testing of 10Base-T, 100BaseTX, 1000-BaseTX and BNC 10Base2 UTP cables
  • Ideal for checking the continuity of cables or verifying their crimping.
  • It allows the testing of small network cables or cables already installed, as it has two modules (local and remote).
  • The local module has two female RJ45 connectors and a line of 8 LEDs for pin-to-pin verification (origin and destination).
play_button Watch video
More info
PVP
15.23
Price including VAT: 15.23
PVD
13.42
Shipping costs: 0,00 *
GB-SE1 1ES
2 years
warranty
14 days
returns
100%
safe

In stock
Available more than 10

More info
Specifications
  • UTP network cable and coaxial cable tester, which also detects the pin-out of the cables.
  • Allows testing of 10Base-T, 100BaseTX, 1000-BaseTX and BNC 10Base2 UTP cables
  • Ideal for checking the continuity of cables or verifying their crimping.
  • It allows the testing of small network cables or cables already installed, as it has two modules (local and remote).
  • The local module has two female RJ45 connectors and a line of 8 LEDs for pin-to-pin verification (origin and destination).

Keywords

Did not find what you were looking for? These topic could help you

More info

UTP and BNC network cable tester that also detects the pin-out of the cables. Allows testing of BNC 10Base2, UTP 10Base-T, 100BaseTX and 1000-BaseTX cables. It allows the testing of small network cables or cables already installed as it has two modules (local and remote). The local module is completely autonomous since it has 2 female RJ45 connectors to connect both ends of the cables to be tested and 2 lines of 8 LEDs for pin-to-pin verification (origin and destination). The remote module has 1 female RJ45 connector and a line of 8 LEDs to check the status of the cable pin by pin.

Specifications
  • UTP network cable and coaxial cable tester, which also detects the pin-out of the cables.
  • Allows testing of 10Base-T, 100BaseTX, 1000-BaseTX and BNC 10Base2 UTP cables
  • Ideal for checking the continuity of cables or verifying their crimping.
  • It allows the testing of small network cables or cables already installed, as it has two modules (local and remote).
  • The local module has two female RJ45 connectors and a line of 8 LEDs for pin-to-pin verification (origin and destination).
  • The remote module has a female RJ45 connector and a line of 8 LEDs to check the status of the cable pin by pin.
  • Both modules can be coupled together.
  • Includes cables for testing BNC cables.
  • Gross Weight: 230 g
  • Product size (width x depth x height): 10.3 x 6.0 x 2.5 cm
  • Number of packages: 1
  • Packages size: 15.5 x 10.8 x 3.3 cm
  • Master-pack: 50

Videos

play_button Watch video

Technical terms

  • Types of network cables (UTP, FTP, STP)
  • BNC
  • RJ45
  • Categories network cables
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

Do you have any question about this product?