The digital dynamometer with external load cell, USB interface and software is a useful device for measuring compressive forces in hard-to-reach places. The load cell is connected to the dynamometer by a cable of approximately 3 meters. This compression load cell is small in size and can be easily mounted thanks to the threaded holes in the lower part. It has a measurement rate of up to 1600 Hz. The results are presented in real time as a momentary value and as a graphical curve on the device screen. You can also save the results in the internal memory or transfer them in real time via its USB interface to a computer, with a maximum measurement rate of 800 Hz. The software is included together with the shipment. The dynamometer has the Peak Hold function, which allows the peak value to be frozen on the screen until it is exceeded or cleared. In addition, two limit values can be set that compare the current measured value. If the value is exceeded, the display will emit a signal, allowing it to be used, for example, in combination with a machine controller. Manufactured by PCE with reference PCE-DFG NF 50K.

Specifications

• Digital dynamometer with external load cell, USB interface and software.
• Ideal for measuring compression forces in hard-to-reach places.
• Load cell with reduced dimensions, connected to the dynamometer through a 3 m cable.
• Measurement rate up to 1600 Hz.
• Sampled values are presented in real time on the dynamometer screen.
• You can save the values in the internal memory or transfer them in real time via the USB interface to a computer.
• PEAK HOLD function to freeze the peak value on the dyno display.
• Setting of two limit values for continuous comparison of the current measured value.
• External interface for use in combination with a machine controller.

• Gross Weight: 1.805 kg
• Number of packages: 1
• Master-pack: 1