With the installation tester you can perform a quick check of the FI protection switches. This tool is characterized by its flexibility, since you can select different test currents. The installation tester determines the trip current and the trip time of the FI protection circuit breakers, which are the relevant safety parameters. The handling of this tool is easy, since parameters such as the test current, the type of FI breaker, whether to measure the trip current and trip time, and whether the test current should start with a positive or negative half wave. By pressing a single key, the LCD screen will display the measurement result. If the input voltage is too high, there is no ground connection, or the ground potential is higher than 50 V, the installation tester will emit an acoustic signal. Therefore, the installation tester is a useful tool to reliably test FI circuit breakers. Manufactured by PCE with reference PCE-RCD 1.

Specifications

• Installation tester to determine the tripping current and tripping time of FI protection circuit breakers.
• Selection of different test currents for flexible use.
• Simple one-button operation.
• Large LCD display to measure the measurement value.
• It emits an acoustic signal when the input voltage is too high, when the ground connection is missing or when the ground potential is higher than 50 V.
• Ideal for checking FI protection switches in electrical installations.
• Compatibility with normal or selective FI switches.
• Connection with a power supply for the test current.
• Characteristics: Selection of different test currents, trip current and trip time measurement, LCD screen to display the measurement value, acoustic signal to alert input voltages that are too high, fault to earth or earth potential higher than 50V
• Technology: leakage current measurement.
• Gray.

• Gross Weight: 1.141 kg
• Number of packages: 1
• Master-pack: 1