Serial ATA or SATA (acronym for Serial Advanced Technology Attachment) is a data transfer interface between the motherboard and some storage devices such as hard disk, regrabadores readers and CD/DVD/BR, SSDs or other high performance devices are still being developed. SATA I Frequency: 1500 MHz Bits: 1. Bits 8 Real Speed: 150 MB/s. SATA II. Frequency: 3000 MHz Bits: 1 bits 8 Real Speed: 300 MB/s. SATA III Frequency: 6000 MHz Bits: 1. Bits 8 Real Speed: 600 MB/s eSATA. SATA type connector for connection of external peripherals.

A Peripheral Component Interconnect (PCI, "Peripheral Component Interconnect") is a bus (picture 2) computer standard for connecting peripheral devices directly to your motherboard. Dimensions of the cards - PCI (standard) 107 mm x 312 mm (picture 1) - PCI Low Profile Height: 36.07 mm x 64.41 mm Depth: 119.91 mm to 167.64 mm - Mini PCI Mini PCI cards have a Maximum consumption2W.

Commonly referred to as internal Molex connectors on a desktop computer. It is used for peripherals that require more amperage than that provided by the data cable such as:

• Hard drives (IDE, SCSI and SATA)
• Units diskettes (3.5 'and 5.25 ")
• Optical drives (CD, DVD and Blu-Ray)
• Video cards (PCI-e plates, PCI and AGP)
• Cooling systems (air and liquid)
• Modding circuits (LEDs, light pipes, etc.)
• Naturally, there are two types of Molex connectors, a male connector and a female connector. Plugs are used to branch outlets and split them into two but most of the time are integrated into the PCB peripherals.

The electrical conductors exiting the power supply toward Molex connectors have colorsdistinguish:

ATX corresponds to a standard that was created to improve Baby-At. The idea of ??this improvement was rejoining carasterísticas to improve the speed and what it cost to mount a plate. ATX measures are 30.5 cm x 24.4 cm. From here in the ATX format we can be found different formats - E-ATX has measure 30 cm by 33 cm - ATX-30 having a measurement 30.5 24.4 cm - Mini ATX has a measure x 28.4 cm

Within the different types of electrical cables we can find single or multifilament cables. The difference lies in the number of conductors that make up the cable. Single wire cables contain only a single conductive wire, whereas multi-wire cables contain more than one wire. Do not confuse multifile (A) or single wire (B) with monopolar (C), bipolar (D) or multipolar (E) cable. Monopolar cables have only oneSingle conductor, bipolar cables have two conductors, while multi-pole cables have more than two conductors. It may be said that any unipolar, bipolar or multipolar cable can be single-ended or multi-stranded. In the case of single wire cables we will talk about rigid cables, whereas the multifilament cables will be flexible.
In the following table you can see the difference between them.