Trigmaster II 2.4GHz Aputure Remote Trigger for Nikon Receiver

Trigmaster II 2.4GHz by Aputure is a multi-purpose camera and flash trigger. It performs the functions of receiver (Rx), transmitter (Tx) and transmitter/receiver (Rx and Tx) in a single device. Photographers no longer need to have several models of triggers for camera, flash, receiver or transmitter. With this unique model you can synchronize several cameras and flashes with a single click. An all in one.

The technologyauto-sensing available, analyzes the status of the Trigmaster II connection to determine the operating mode (Tx, Rx or Tx/Rx). It has interlink triggering technology that allows receiving and transmitting signals simultaneously.

Examples of use

• In remote control mode (Tx) as trigger of one or several remote modules (Rx) connected to cameras or flash.
• Connected to the shoee Camera flash can perform the trigger (Tx) functions of one or more flash units. You can also perform the functions of signal receiver from a remote control (Rx) and retransmit the signals to other modules (Tx).
• Connected to the flash shoe of a camera can perform the trigger functions of the camera to which it is connected (Rx). This is useful to shoot one or more photo cameras simultaneously.
• Connected to a flash (Rx) performs the functions of firing the flash upon receiving the trigger signal.
• And many other examples. In short you can shoot any camera or flash to which it is connected, due to the action of a remote trigger.

Specifications

• Compact module with integrated antenna.
• Scope: 120 m approximately.
• Receiver module (Rx) is supplied. Gaveoperating selector selector Rx (camera mode, flash mode, off mode).
• Operational in the 2.4 G frequency range.
• Transmission channel selector (1 to 16).
• Ultra-fast chipset that synchronizes at speeds of 1/250 seconds.
• Continuous shooting frequency: 8 frames/second.
• Possibility of acquiring more Rx remote modules (reference #JI5x)

Rx Module

• Zapaflash female to directly connect a speed light flash to the module.
• Flash shoe male to connect to the flash shoe of a photo camera.
• 3-position switch: OFF, camera mode and flash mode.
• Module that allows 2 operations: connected to the camera shoe for the camera's trigger control, or connected to a remote studio flash or a speedlite.
• Tamaor: 71 x 38 x 32 mm.
• It is powered by 2 AAA 1.5 V batteries.
• 2.5 "minijack connector for Trigmaster II connection cable to flash for studio flash shooting.
• Minijack connector 2,5 "for connection cable from the Trigmaster II to a camera for shooting the camera.

It includes

• Trigmaster II 2.4GHz Tx module.
• Minija synchronization cableck from 2.5 "male to 3.5" male minijack.
• 3.5 "female to male 6.3" jack minijack adapter.
• 2 1.5V AAA batteries.

Compatibility

• For Nikon cameras.