1-inch female solenoid valve designed to regulate the flow of water in underground irrigation systems. This mechanism is activated by an electrical impulse, therefore, it allows the water to flow through it, heading to the areas in need of irrigation. This valve is 1 inch in size and is built to withstand the pronounced water pressures in an irrigation system. Its main function is to control the flow of water that flows within an irrigation system, guaranteeing a uniform distribution of water. It is a device commonly used in installations of buried irrigation systems and programmers that require a push mechanism to improve and make their irrigation system more effective. Easy to install and manipulate. Tool designed to facilitate and promote the flow of water through an irrigation programmer. Engineered from tough, tough polypropylene used in a wide variety of applications. Practical solution for the efficient movement of water flow in pipes.

Specifications

• 1-inch female solenoid valve, useful for regulating the flow of water in underground irrigation systems with an electrical connection in the form of a signal from the irrigation programmer. It allows and pushes the water within the irrigation system, uniformly, to cover all the irrigation areas that the user needs. Excellent for underground irrigation systems from an irrigation controller.
• Solenoid valve made of partially crystalline thermoplastic polypropylene, which is obtained from the polymerization of propylene. In addition, it contains reinforced nylon and fiberglass. It is characterized by its high thermal and electrical resistance. It also adds EPDM rubber gaskets resistant to abrasion and wear
• The mechanism works by means of an electromagnet that regulates the flow of water by opening and closing in response to electrical charge. This device is essential in a buried irrigation system. In this way, the device proposes pushing the water, thus allowing it to reach the sprinklers with force, ensuring that the necessary water arrives to comply with the effective irrigation output to cover the entire irrigation area.
• It includes a filter inside for cleaning particles from agents external to the water particles received. It has a starting current of 0.4 A (9.6 VA) and a 24 VAC solenoid. The flow regulator comprises a maximum of 5.67 m3/h or 94.5 l/minute. It has a regime current of 0.3 A (7.2 VA) supporting a maximum water temperature of 4 to 45 degrees.
• For its installation, first of all it is necessary to find a place where the solenoid valve has quick and direct access to the water and is protected from mechanical damage. The water supply must be cut off prior to installation. Secondly, the pipes that will be attached to the device must be prepared and installed, positioning them so that one pipe acts as an input and another as an output. It is recommended to use Teflon tape to make the connection airtight.
• Finally, you have to connect the cables to the electrical power supply to make it work. Open the water supply and turn on the power supply that usually comes from the irrigation controller, and check that the solenoid valve works correctly without leaks or interruptions.
• Essential device for anyone who wants to install an irrigation system and wants to maintain its circuit optimally and effectively, generating constant water movement to reach all ends of the irrigation system. Easy to handle and use and requires little maintenance, it should only be changed in case of breakage or poor connection and in extreme cases when a patch or care cannot be applied to it. What makes it an essential option for installers and end users who need the solenoid valve for their irrigation installations.
• Ideal for controlling and regulating the flow of water in underground irrigation systems, providing better water coverage throughout the system, thus reaching all ends of the circuit.
• Polypropylene device commonly used in 25 mm diameter pipes thanks to its 1 inch female groove. Pipes of other millimeters may be connected depending on whether or not some type of reducing nipple is connected.
• This mechanism has a maximum pressure of 0.35 to 17.24 Bar (5 to 250 PSI).
• Measurements (width x depth x height): 11.2 cm x 7.8 cm x 13.5 cm.
• Weight: 0.406 kg.
• black colour.

• Gross Weight: 406 g
• Product size (width x depth x height): 11.2 x 7.8 x 13.5 cm
• Number of packages: 1
• Packages size: 13.5 x 11.2 x 7.8 cm
• Master-pack: 1