The external load cell dynamometer offers a versatile solution for measuring compressive forces in hard-to-reach places. It is equipped with a compression load cell connected to the device by a cable of approximately 3 meters. This load cell has threaded holes at the bottom to allow fixed mounting, as well as having reduced dimensions for use in many applications. The dynamometer has a measurement rate of up to 1600 Hz, and the collected values are displayed in real time on the device's screen as an instantaneous value or as a graphical curve. These data can be saved in the internal memory or transferred to a computer via the USB interface, with a maximum measurement rate of 800 Hz. The necessary software for this transfer is included in the shipment. In addition, the device has a Peak Hold function, which freezes the peak value on the dyno display until it is exceeded or cleared. Two limit values can be set which carry out a continuous comparison with the current measured value. If these limits are exceeded, the display will emit a signal, allowing the machine to be controlled via an external interface. Manufactured by PCE with reference PCE-DFG NF 10K.

Specifications

• Digital dynamometer with external load cell, USB interface and software included.
• Ideal for measuring compression forces in hard-to-reach places.
• Load cell with reduced dimensions to be used in many applications.
• Measurement rate up to 1600 Hz.
• Values displayed on the dynamometer screen in real time as a momentary value and as a graphic curve.
• Internal memory to save the values or transfer them to a computer via the USB interface.
• PEAK HOLD function to freeze the peak value on the screen.
• Setting of two limit values to output a signal when these values are exceeded.

• Gross Weight: 1.805 kg
• Number of packages: 1
• Master-pack: 1