The external load cell dynamometer is a useful device for measuring compressive forces in hard-to-reach areas. It is equipped with a cable of approximately 3 meters that connects the load cell to the dynamometer. The load cell is small in size and has tapped holes in the bottom to allow for fixed mounting. The dynamometer can measure up to 1600 Hz and present the real-time values as a momentary value and as a graph curve on the screen. These values can be saved in the internal memory or transferred to a computer via the USB interface, with a maximum measurement rate of 800 Hz. The software is included in the shipment. The PEAK HOLD function allows to freeze the peak value in the dynamometer display until passed or cleared. In addition, two limit values can be set to compare the current measured value. If one of these values is exceeded, the display will emit a signal. This signal can be used with an external interface to control a machine. Manufactured by PCE with reference PCE-DFG NF 2K.

Specifications

• Digital dynamometer with external load cell, USB interface and software.
• Ideal for measuring compression forces in hard-to-reach places.
• Load cell connected to the dynamometer through a cable of approx. 3m.
• Measurement rate up to 1600 Hz.
• Sampled values are presented in real time as a momentary value and as a graphic curve.
• You can save the values in the internal memory or transfer them in real time via the USB interface to a computer.
• PEAK HOLD function allows to freeze the peak value on the dynamometer screen.
• Allows two limit values to be set for continuous comparison of the current measured value.
• Display will emit a signal if a limit value is exceeded.
• External interface for use in combination with a machine controller.

• Gross Weight: 1.805 kg
• Number of packages: 1
• Master-pack: 1