11/08/2024 8:08 p.m.
https://cablematic.com/en/products/wired-push-button-transmitter-transmitter-for-wireless-wall-call-system-1000m-1-key-QI055/
https://cablematic.com/en/products/wired-push-button-transmitter-transmitter-for-wireless-wall-call-system-1000m-1-key-QI055/
Wired push button transmitter transmitter for wireless wall call system 1000m 1 key
REF: QI055
Specifications
- Wireless push button to be used with an automatic call system. Wall switch imitation model.
- It has a single large CALL button.
- Approximate operating range: 1000 m (in optimal conditions).
- Wall fixing with screws (not included).
- It has an extendable antenna for better coverage.
Watch video
PVP
€9.04
Price including VAT:
€9.04
PVD
€7.94
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
Buy before:
Receive it:
Friday 15
Delivery times are approximate. Cablematic is not responsible for delays.
2 years
warranty
warranty
14 days
returns
returns
100%
safe
safe
Specifications
- Wireless push button to be used with an automatic call system. Wall switch imitation model.
- It has a single large CALL button.
- Approximate operating range: 1000 m (in optimal conditions).
- Wall fixing with screws (not included).
- It has an extendable antenna for better coverage.
Keywords
Did not find what you were looking for? These topic could help you
More info
Push button to be used with wireless call systems. This button must be used in conjunction with an LED display compatible with the wireless call system. These systems can be used in restaurants, bars, hotels, hospitals, shops, care for the elderly, etc.
To configure a wireless call system, LCD displays (receivers from the vendor) and call buttons (transmitters from the customer) must be purchased. The normal configuration is an LCD display (receiver) for several call modules or buttons (transmitters). However, it is also possible to configure more than one LCD display, and all LCD displays will show the same call information.
System setup is easy. The installation does not require cables, since the communication between the LCD display and the call buttons is done wirelessly. The pushbuttons must be registered on the LCD display, and a specific number must be assigned to each pushbutton. This number can correspond to the table number, room number, section number, etc., depending on the type of application. When the client (user of the button or transmitter) presses the key, the information is shown on the LCD display to which it is paired. In this way, the seller can take the appropriate actions to provide the necessary attention to the client.
Push button specifications
To configure a wireless call system, LCD displays (receivers from the vendor) and call buttons (transmitters from the customer) must be purchased. The normal configuration is an LCD display (receiver) for several call modules or buttons (transmitters). However, it is also possible to configure more than one LCD display, and all LCD displays will show the same call information.
System setup is easy. The installation does not require cables, since the communication between the LCD display and the call buttons is done wirelessly. The pushbuttons must be registered on the LCD display, and a specific number must be assigned to each pushbutton. This number can correspond to the table number, room number, section number, etc., depending on the type of application. When the client (user of the button or transmitter) presses the key, the information is shown on the LCD display to which it is paired. In this way, the seller can take the appropriate actions to provide the necessary attention to the client.
Push button specifications
- Wireless push button to be used with an automatic call system. Wall switch imitation model.
- It has a single large CALL button.
- Approximate operating range: 1000 m (in optimal conditions).
- Wall fixing with screws (not included).
- It has an extendable antenna for better coverage.
- It also includes a control knob with a button connected by cable to the emitter. The cable has a length of 65cm.
- Works with 23A 12V battery (included). It is housed in the back of the button.
- Automatic code memorization system (self-learning).
- Size: 86 x 86 x 14mm.
- Operating frequency: 433.92 MHz.
- Compatible with various ranges of LED visors (our references #QI1x).
- Gross Weight: 65 g
- Product size (width x depth x height): 8.6 x 1.4 x 8.6 cm
- Number of packages: 1
- Packages size: 12.5 x 10.0 x 4.1 cm
- Master-pack: 1
Technical terms
- LED
- Hz
LED