12/23/2024 5:37 a.m.
https://cablematic.com/en/products/power-over-ethernet-poe-kit-passive-two-modules-RA050/
https://cablematic.com/en/products/power-over-ethernet-poe-kit-passive-two-modules-RA050/
Power over Ethernet PoE Kit passive two modules
REF: RA050
Specifications
- Kit that consists of two modules of reduced taHand: the injector and the separator.
- The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8).
- The SEPARATOR again separates the data and the DC current (LAN + DC) that will feed the device.
- The maximum distance between these two devices is 100m.
- Works with TIA/EIA-568, Cat.5/5e cables,4 pairs for 10Base-T or 100Base-TX.
Watch video
PVP
€9.37
Price including VAT:
€9.37
PVD
€8.22
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
Buy before:
Receive it:
Friday 27
Delivery times are approximate. Cablematic is not responsible for delays.
2 years
warranty
warranty
14 days
returns
returns
100%
safe
safe
Specifications
- Kit that consists of two modules of reduced taHand: the injector and the separator.
- The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8).
- The SEPARATOR again separates the data and the DC current (LAN + DC) that will feed the device.
- The maximum distance between these two devices is 100m.
- Works with TIA/EIA-568, Cat.5/5e cables,4 pairs for 10Base-T or 100Base-TX.
Keywords
Did not find what you were looking for? These topic could help you
More info
Kit that consists of two modules of reduced size: the injector and the separator. The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8). The SEPARATOR again separates the data and the DC current (LAN + DC) that will feed the device.
Specifications
Specifications
- Kit that consists of two modules of reduced taHand: the injector and the separator.
- The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8).
- The SEPARATOR again separates the data and the DC current (LAN + DC) that will feed the device.
- The maximum distance between these two devices is 100m.
- Works with TIA/EIA-568, Cat.5/5e cables,4 pairs for 10Base-T or 100Base-TX.
- Both modules are exactly the same and can act as an injector or separator.
- Each of them has a RJ45-male connector, a RJ45-female connector (to connect both modules) and DCjack power connector (male/female).
- PoE passive and economical solution for those who want to transmit power through a UTP cable (up to 48VDC).
- Gross Weight: 60 g
- Product size (width x depth x height): 21.0 x 2.0 x 2.0 cm
- Number of packages: 1
- Packages size: 21.0 x 2.0 x 2.0 cm
Technical terms
- Types of network cables (UTP, FTP, STP)
- PoE
- RJ45
- Categories network cables
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)