03/29/2024 1:13 p.m.
https://cablematic.com/en/products/poe-lan-extender-and-repeater-for-additional-100-m-gigabit-RA083/
PoE LAN Extender and Repeater for additional 100 m gigabit
REF: RA083
Specifications
  • Extends a PoE signal (ethernet data and power) at a distance of 100 m additional.
  • Possibility of chaining up to 4 repeaters to obtain a section of 500 m of cable.
  • It does not require an external power supply because it is powered by the PoE power supply itself.
  • Comcompatible with the IEEE 802.3af PoE standard.
  • Supports transmission speeds of 10, 100 and 1000 Base-T.
play_button Watch video
More info
PVP
138.84
Price including VAT: 138.84
PVD
125.19
2 years
warranty
14 days
returns
100%
safe

Out of stock

We will notify you when it is back in stock.
More info
Specifications
  • Extends a PoE signal (ethernet data and power) at a distance of 100 m additional.
  • Possibility of chaining up to 4 repeaters to obtain a section of 500 m of cable.
  • It does not require an external power supply because it is powered by the PoE power supply itself.
  • Comcompatible with the IEEE 802.3af PoE standard.
  • Supports transmission speeds of 10, 100 and 1000 Base-T.

Keywords

Did not find what you were looking for? These topic could help you

More info

Ethernet signal repeater with PoE (Power over Ethernet) that allows extending an ethernet connection to an additional 100 m. The regulation allows a maximum distance of between 100 and 120 m of cable between network equipment connected by UTP ethernet cable. It is possible to extend this limitation to a maximum distance of up to 500 m using several of these repeaters (up to 4 chained repeaters). Repeater compatible with IE regulationsEE 802.3af that allows the transmission of data and power through the same ethernet cable.

Specifications
  • Extends a PoE signal (ethernet data and power) at a distance of 100 m additional.
  • Possibility of chaining up to 4 repeaters to obtain a section of 500 m of cable.
  • It does not require an external power supply because it is powered by the PoE power supply itself.
  • Comcompatible with the IEEE 802.3af PoE standard.
  • Supports transmission speeds of 10, 100 and 1000 Base-T.
  • Includes status indicator LEDs.
  • Easy installation It has two female RJ45 connectors.
  • Size: 102 x 29 x 20 mm.
  • Weight: 98 g.
  • Gross Weight: 170 g
  • Product size (width x depth x height): 12.0 x 3.5 x 2.0 cm
  • Number of packages: 1
  • Packages size: 16.5 x 12.0 x 3.0 cm

Videos

play_button Watch video

Technical terms

  • Types of network cables (UTP, FTP, STP)
  • PoE
  • Gbps
  • RJ45
  • Categories network cables
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

Do you have any question about this product?