03/29/2024 4:18 p.m.
https://cablematic.com/en/products/power-over-ethernet-24w-poe-injector-RA052/
Power Over Ethernet 24W PoE injector
REF: RA052
Specifications
  • Power supply compatible with PoE (Power over Ethernet).
  • It is a power supply with an input voltage of 100-240 VAC (50-60 Hz).
  • The injected voltage is up to 48VDC (500 mA) which is the one that is always transmitted through the UTP cable.
  • It is in the splitter where this 48V voltage will be converted to the desired voltage of 5V, 9V or 12V.
  • 24W output power.
play_button Watch video
More info
PVP
48.63
Price including VAT: 48.63
PVD
43.84
Shipping costs: 30,75 *
GB-SE1 1ES
2 years
warranty
14 days
returns
100%
safe

In stock
Only 2 units

More info
Specifications
  • Power supply compatible with PoE (Power over Ethernet).
  • It is a power supply with an input voltage of 100-240 VAC (50-60 Hz).
  • The injected voltage is up to 48VDC (500 mA) which is the one that is always transmitted through the UTP cable.
  • It is in the splitter where this 48V voltage will be converted to the desired voltage of 5V, 9V or 12V.
  • 24W output power.

Keywords

Did not find what you were looking for? These topic could help you

More info

Power supply compatible with PoE (Power over Ethernet). It is a power supply with an input voltage of 100-240 VAC (50-60 Hz). The injected voltage is up to 48VDC (500 mA) which is the one that is always transmitted through the UTP cable. It is in the splitter where this 48V voltage will be converted to the desired voltage of 5V, 9V or 12V. 24W output power. It has an IEC320 three-pole connector for the connection to the electricity network (cable included) and two RJ45-Female connectors for the injection of energy into the network. It basically acts as a pass through. Ideal for powering network devices (access points, routers, etc.) that support PoE.
  • Gross Weight: 390 g
  • Product size (width x depth x height): 6.0 x 12.0 x 4.0 cm
  • Number of packages: 1
  • Packages size: 21.5 x 6.5 x 6.0 cm
  • Master-pack: 50

Videos

play_button Watch video

Technical terms

  • Types of network cables (UTP, FTP, STP)
  • Hz
  • PoE
  • RJ45
  • Categories network cables
  • VAC
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

Do you have any question about this product?