1” solenoid valve for regulating water flow in underground irrigation systems

A 1-inch female solenoid valve designed for regulating water flow in underground irrigation systems. This mechanism is activated by an electrical impulse, allowing water to flow through it and be directed to the areas requiring irrigation. This 1-inch valve is manufactured to withstand the high water pressures in an irrigation system. Its main function is to control the flow rate of water within the system, ensuring uniform water distribution. It is a commonly used device in underground irrigation systems and controllers that require a push mechanism to improve and enhance the efficiency of the irrigation system. Easy to install and operate. This tool is designed to facilitate and accelerate water flow through an irrigation controller. Constructed from durable, hard polypropylene, it is suitable for a wide variety of applications. A practical solution for efficient water flow in pipes.

Specs

• 1-inch female solenoid valve, useful for regulating water flow in underground irrigation systems with an electrical connection via a signal from the irrigation controller. It allows and delivers water evenly throughout the irrigation system to cover all the user's irrigation needs. Excellent for underground irrigation systems controlled by an irrigation controller.
• This solenoid valve is manufactured from partially crystalline thermoplastic polypropylene, obtained from the polymerization of propylene. It also contains reinforced nylon and fiberglass. It is characterized by its high thermal and electrical resistance. Additionally, it features abrasion- and wear-resistant EPDM rubber seals.
• The mechanism operates via an electromagnet that regulates water flow by opening and closing in response to an electrical charge. This device is essential in an underground irrigation system. In this way, the device provides pressure to the water, allowing it to reach the sprinklers with sufficient force and ensuring that the necessary amount of water is delivered to effectively cover the entire irrigation area.
• It includes an internal filter to remove particles from the incoming water. It has a starting current of 0.4 A (9.6 VA) and a 24 VAC solenoid. The flow regulator has a maximum capacity of 5.67 m³/h (94.5 l/min). It operates at a current of 0.3 A (7.2 VA) and can handle water temperatures from 4 to 45 degrees Celsius.
• For installation, first find a location where the solenoid valve has quick and direct access to water and is protected from mechanical damage. The water supply must be shut off before installation. Second, prepare the pipes that will connect to the device and install them, positioning one pipe as the inlet and the other as the outlet.
• Finally, connect the cables to the power supply to operate it. Turn on the water supply and switch on the power supply, which is usually part of the irrigation controller, and check that the solenoid valve is functioning correctly without leaks or interruptions.
• An essential device for anyone installing an irrigation system and maintaining its circuit optimally and effectively, ensuring constant water flow to reach all parts of the system. Easy to handle and use, it requires minimal maintenance; replacement is only necessary in case of breakage or poor connection, or in extreme cases where patching or repair is not possible. This makes it an essential option for installers and end users who need a solenoid valve for their irrigation systems.
• Ideal for controlling and regulating water flow in buried irrigation systems, providing better water coverage throughout the system, thus reaching all ends of the circuit.
• Polypropylene fitting commonly used on 25 mm diameter pipes thanks to its 1-inch female socket. Pipes of other diameters can be connected depending on whether or not a reducing nipple is used.
• This mechanism has a maximum pressure of 0.35 to 17.24 Bar (5 to 250 PSI).
• Measurements (width x depth x height): 11.2 cm x 7.8 cm x 13.5 cm.
• Weight: 0.406 kg.
• Black color.