05/08/2021 10:03 p.m.
https://cablematic.com/en/products/amplifier-repeater-3g-lte-4g-2100mhz-2600mhz-75db-with-antennas-and-cables-GW009/
Amplifier repeater 3G LTE 4G 2100MHz 2600MHz 75dB with antennas and cables
REF: GW009
Specifications
  • 2100Mhz downlink operating frequency: 2110 - 2170 MHz.
  • 2100Mhz uplink operating frequency: 1920 - 1980 MHz.
  • 2600Mhz downlink operating frequency: 2620 - 2690 MHz.
  • 2600Mhz uplink operating frequency: 2520 - 2570 MHz.
  • Maximum output power: 16 dBm.
play_button Watch video
Go to technical terms
PVP
437.94
Price including VAT: 437.94
PVD
381.43
Shipping costs: 30,87 *
GB-SE1 1ES
Delivery times are approximate. Cablematic is not responsible for delays.
2 years
warranty
14 days
returns
100%
safe

In stock
Only 1 units

Go to technical terms
Specifications
  • 2100Mhz downlink operating frequency: 2110 - 2170 MHz.
  • 2100Mhz uplink operating frequency: 1920 - 1980 MHz.
  • 2600Mhz downlink operating frequency: 2620 - 2690 MHz.
  • 2600Mhz uplink operating frequency: 2520 - 2570 MHz.
  • Maximum output power: 16 dBm.

More info

3G and LTE 4G signal repeater at 2100MHz and 2600MHz frequencies. The 2100 / 2600MHz frequencies are used in 3G / 4G mobile telephony for digital voice transmission and high-speed data transmission. Ideal for increasing the quality of the mobile phone signal in environments where coverage is lacking. The typical installation could be an indoor room (poor signal quality), where the 3G / LTE 4G repeater is placed, while the receiving antenna (good signal quality) is placed outside.

Kit Contents
  • Omnidirectional outdoor antenna 806-960MHz and 1710-2700MHz with 8 / 9dBi gain.
  • 806-960MHz and 1710-2700MHz indoor panel antenna with 6.5 / 8dBi gain.
  • 2 coaxial cables of 5m and 10m with male N connectors at both ends.
  • 3G and LTE 4G signal repeater / amplifier.
  • 5 VDC power supply.
  • Required screws.
specs
  • 2100Mhz downlink operating frequency: 2110 - 2170 MHz.
  • 2100Mhz uplink operating frequency: 1920 - 1980 MHz.
  • 2600Mhz downlink operating frequency: 2620 - 2690 MHz.
  • 2600Mhz uplink operating frequency: 2520 - 2570 MHz.
  • Maximum output power: 16 dBm.
  • Maximum gain: 80dB ± 2dB (downlink) and 75dB ± 2dB (uplink).
  • Characteristic impedance: 50 Ohm.
  • Repeater mounted in a metal housing of size 310x245x35mm.
  • Repeater with two N-female connectors (indoor / outdoor).
  • Inner panel type antenna with 20cm cable terminated in female N connector.
  • Omnidirectional external antenna with system for fixing to the wall or tubular pole. It has a 20cm coaxial cable terminated in a female N connector.
  • The omni-directional antenna is installed outdoors to capture the GSM / 3G signal where there is coverage. The repeater and panel antenna are installed indoors to increase signal quality and offer coverage.
  • Possibility of acquiring coaxial cable to extend the length of the cable (# GW3x and adapter # WH83).
  • Gross Weight: 6.0 kg
  • Product size (width x depth x height): 46.0 x 33.0 x 25.0 cm
  • Number of packages: 1
  • Packages size: 46.0 x 33.0 x 25.0 cm
  • Master-pack: 1

Videos

play_button Watch video

Technical terms

  • Impedance Ω
  • Hz
  • GSM
  • dBm
  • dBm
  • 4G
  • VDC
Impedance Ω
The impedance (Z) is a measure of opposition that a circuit to a current when a voltage is applied. The impedance extends the concept of resistance circuits alternating current (AC), and has both magnitude and phase, unlike resistance, which has only magnitude. When a circuit is powered with direct current (DC), there is no distinction between the impedance and resistance; the latter can be thought csa impedance with zero phase angle.

Do you have any question about this product?