12/23/2024 5:40 p.m.
https://cablematic.com/en/products/converter-rs232-to-rs422-and-rs485-aten-ic485sn-TI043/
https://cablematic.com/en/products/converter-rs232-to-rs422-and-rs485-aten-ic485sn-TI043/
Converter RS232 to RS422 and RS485 Aten IC485SN
REF: TI043
OUTLET
Specifications
- Bi-directional converter from RS232 to RS422/485.
- Data transmission controlled by RTS signal.
- DCE/DTE selectable.
- Selectable operation between point-to-point, multidrop, and simplex/duplex.
- Use of 4-wires in full-duplex, and 2-wire in half-duplex.
Watch video
PVP
€53.55
€16.60
Price including VAT:
€16.60
PVD
€47.06
€14.59
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
Buy before:
Receive it:
Monday 30
Delivery times are approximate. Cablematic is not responsible for delays.
2 years
warranty
warranty
14 days
returns
returns
OUTLET
Specifications
- Bi-directional converter from RS232 to RS422/485.
- Data transmission controlled by RTS signal.
- DCE/DTE selectable.
- Selectable operation between point-to-point, multidrop, and simplex/duplex.
- Use of 4-wires in full-duplex, and 2-wire in half-duplex.
More info
Bi-directional converter from RS232 to RS422/485. Data transmission controlled by RTS signal. DCE/DTE selectable. Selectable operation between point-to-point, multidrop, and simplex/duplex. Use of 4-wires in full-duplex, and 2-wire in half-duplex. It has DB25-Female connector (RS232) and block of 4 connectors and RJ11 (RS422/485). It has a switch (SW1) to configure the DTE and DCE mode. It has another switch (SW2) for cconfigure the parameters of Tx and Rx (TxON RxON, TxRTS RxON, TxDTR/RTS RxDSR/ON). Size of 74.5 x 54 x 18.5 mm and weight of 60g. It allows the operation without need of feeding. AC9V300mA (max.)
- Gross Weight: 210 g
- Number of packages: 1
- Master-pack: 20
Technical terms
- Communication Series
- Parallel
- RJ11
- RS232
- RS485
Communication Series
RS-232 (Recommended Standard 232, also known as EIA/TIA RS-232C) is an interface that designates a standard for the exchange of a series of binary data between a DTE (Data Terminal Equipment) and DCE (Data Communication Equipment , Data Communication Equipment), although there are others in which the RS-232 interface is also used. An equivalent definition published by the ITU is called V.24. The RS-232 is a connectorDB-25 type (25-pin), although it is normal to find the version of 9-pin (DE-9, or popularly also called DB-9), cheaper and even extended to certain types of peripherals (such as serial mouse PC).