03/28/2024 11:34 p.m.
https://cablematic.com/en/products/electrical-distribution-box-12-modules-abs-plastic-for-surface-spn-ip65-ha-MF013/
Electrical distribution box 12 modules ABS plastic for surface SPN IP65 HA
REF: MF013
Specifications
  • ABS plastic distribution box with IP65 environmental protection.
  • Made of robust gray ABS plastic.
  • Compliant with IEC60670-24 standard.
  • Maximum intensity: 100A.
  • Operating voltage: 240/415V.
play_button Watch video
More info
PVP
20.99
Price including VAT: 20.99
PVD
17.02
Shipping costs: 30,95 *
GB-SE1 1ES
2 years
warranty
14 days
returns
100%
safe

In stock
Only 3 units

More info
Specifications
  • ABS plastic distribution box with IP65 environmental protection.
  • Made of robust gray ABS plastic.
  • Compliant with IEC60670-24 standard.
  • Maximum intensity: 100A.
  • Operating voltage: 240/415V.

More info

Surface distribution box in ABS plastic, with 12 modules in line. The distribution box allows the mounting of standard 18mm wide modules on a DIN rail. Robust distribution box made of plastic. Designed to be installed on a flat surface. Electrical distribution box with IP65 environmental protection, waterproof.

Specifications
  • ABS plastic distribution box with IP65 environmental protection.
  • Made of robust gray ABS plastic.
  • Compliant with IEC60670-24 standard.
  • Maximum intensity: 100A.
  • Operating voltage: 240/415V.
  • 35x7mm DIN rail for fixing the modules.
  • Darkened transparent front door to protect the modules.
  • Door opening to the side (horizontal rotation).
  • Wall fixing with screws (not included). It is fixed directly to the surface.
  • Model for the installation of 12 standard modules of 18mm width.
  • It is supplied with 6 covered modules and 6 open modules.
  • Module window size: 216 x 47 mm.
  • Distribution box size: 254 x 296 x 138 mm.
  • Gross Weight: 1.004 kg
  • Product size (width x depth x height): 30.5 x 10.5 x 21.0 cm
  • Number of packages: 1
  • Packages size: 31.0 x 22.0 x 11.0 cm
  • Master-pack: 10

Videos

play_button Watch video

Technical terms

  • IP65
  • DIN
  • SPN
  • DIN Rail
  • IP Protection
  • ABS
IP65
IP65 Although it seems very complicated nomenclature IP standards is only one division in two digits, where each digit indicates that it is being served to meet these regulations. For the first digit would be: 0 No protection 1 element to be used for testing (sphere 50 mm in diameter) should not get to go completely. 2 element to be used for the test (area of ??12.5 mm diameter) should not get to go completely. 3 element to be used for testing (sphere 2.5 mm in diameter) must not come at all. 4 element to be used for the test (sphere of 1 mm in diameter) must not come at all. 5 ingress of dust can not be avoided, but it must not enter an amount that interferes with the proper functioning of equipment. 6 polvo should not come under any circumstances in the case of the second digit: Level Protection Against Expected Results Test Method 0 The water enters the equipment quickly. 1 The equipment is placed in their usual work. Should not enter the water when it is dropped from 200 mm height from the team for 10 minutes (at a rate of 3-5 mm³ per minute) 2, the equipment is put into lugar normal work. You should not enter the water when the leaves fall, for 10 minutes (at a rate of 3-5 mm³ per minute). This test should be performed four times at a rate of one for every 15 ° rotation both vertically and horizontally, starting each time the normal position. 3 The equipment is placed in their usual work. You should not enter the water spray at an angle up to 60 ° right and leftvertically to an average of 10 liters per minute and a pressure of 80-100kN/m for a time not less than 5 minutes. 4 The equipment is placed in their usual work. You should not enter the water thrown from any angle to an average of 10 liters per minute and a pressure of 80-100kN/m for a time not less than 5 minutes. 5 The equipment is placed in their usual work. Should not enter waterthrown jet (from any angle) by means of a nozzle 6.3 mm in diameter, at an average of 12.5 liters per minute and a pressure of 30 kN/m for a time not less than 3 minutes and a no closer than 3 meters. 6 The equipment is placed in their usual work. You should not enter water squirted (from any angle) through a nozzle diameter of 12.5 mm, an average of 100 liters per minute and a pressure of 100 kN/m² for at least three minutes at a distance of not less than 3 meters. 7 The object must endure without any filtration complete immersion in 1 meter for 30 minutes. 8 electrical/electronic equipment must withstand (without filtration) complete and continuous immersion depth and during the time specified by the manufacturer of the product with the agreement ofclient, but provided they are more severe than those specified for the value 7. For IP65 should meet the following standard conditions. Would hold cirscuntancias be dusty and prevent to enter under any cirscuntacia, and bear no powerful jets of water.

Do you have any question about this product?