03/29/2024 1:35 p.m.
https://cablematic.com/en/products/fiber-converter-1000-mbps-single-mode-sc-to-rj45-20km-UF033/
Fiber Converter 1000 Mbps single mode SC to RJ45 20Km
REF: UF033
Specifications
  • 1000Base-TX (RJ45 UTP) to 1000Base-FX (SC fiber optic connector) converter.
  • Complies with IEEE802.3 10 Base-T standard, IEEE802.3u 100 Base-TX / FX standard and IEEE802.3 X.
  • Operational in SM fiber (Single-Mode), which allows a maximum distance of 20Km at 1000Mbps, which extends the maximum distance supported by the UTP topology, which is limited to 100m.
  • It allows full-duplex (simultaneous data transmission) and half-duplex (data reception and subsequent non-simultaneous response sending).
  • 1310nm wavelength.
play_button Watch video
More info
PVP
54.50
Price including VAT: 54.50
PVD
47.68
2 years
warranty
14 days
returns
100%
safe

Out of stock

We will notify you when it is back in stock.
More info
Specifications
  • 1000Base-TX (RJ45 UTP) to 1000Base-FX (SC fiber optic connector) converter.
  • Complies with IEEE802.3 10 Base-T standard, IEEE802.3u 100 Base-TX / FX standard and IEEE802.3 X.
  • Operational in SM fiber (Single-Mode), which allows a maximum distance of 20Km at 1000Mbps, which extends the maximum distance supported by the UTP topology, which is limited to 100m.
  • It allows full-duplex (simultaneous data transmission) and half-duplex (data reception and subsequent non-simultaneous response sending).
  • 1310nm wavelength.

More info

Converter capable of linking the signals generated in a copper cable to fiber optic signals. This enables you to take advantage of fiber optics without making changes to your installation. Ideal to facilitate the connection of a copper UTP Ethernet equipment through a fiber optic link and thus have a better bandwidth, reduce interference and transmit data at a higher speed than a copper cable would allow.

specs

  • 1000Base-TX (RJ45 UTP) to 1000Base-FX (SC fiber optic connector) converter.
  • Complies with IEEE802.3 10 Base-T standard, IEEE802.3u 100 Base-TX / FX standard and IEEE802.3 X.
  • Operational in SM fiber (Single-Mode), which allows a maximum distance of 20Km at 1000Mbps, which extends the maximum distance supported by the UTP topology, which is limited to 100m.
  • It allows full-duplex (simultaneous data transmission) and half-duplex (data reception and subsequent non-simultaneous response sending).
  • 1310nm wavelength.
  • Converter size: 106 x 70 x 26 mm.
  • Gross Weight: 346 g
  • Product size (width x depth x height): 10.6 x 2.6 x 7.0 cm
  • Number of packages: 1
  • Packages size: 24.0 x 13.0 x 5.5 cm
  • Master-pack: 1

Videos

play_button Watch video

Technical terms

  • Types of network cables (UTP, FTP, STP)
  • RJ45
  • Categories network cables
  • Rack unit (U)
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

Do you have any question about this product?