LED floodlight 5W 100mm. White light 6000K day

A: It is equivalent to the temperature of a candle, it is aIn yellow light.

B: It resembles the color of dawn, it is similar to a tungsten bulb.

C: It is the tone of light of the old bulbs that were not led, filament bulb.

D: Similar to a study light.

E: Similar to mid-afternoon light about 20 °, similar to a fluorescent light warm.

F: Similar to mid-afternoon light at about 30 °.

G: Daylight, similar to a lightOf a flash.

H: Sunlight at noon.

I: Very sunny day and clear sky.

J: Partly cloudy day.

K: Cloudy day.

L: Wide shade clear day.

M: Very cloudy day.

N: Blue sky without sun.

O: Very clear day.

1. Current by pulsations.
2. Direct current (DC).
3. Alternating current (AC).
4. Variable current.

1. Anode
2. Cathode

1. Lens/epoxy encapsulation (plastic capsule).
2. Metal contact (conducting wire).
3. Reflective cavity (reflective cup).
4. Semiconductor termination.
5. Anvil.
6. Post.
7. Anvil and post assembly replacing the filament.
8. Flat edge.

• For the ground wire, colored insulation tape will be used:
• Green.
• Green with a yellow line.
• For the neutral cable, blue insulating tape will be used.
• For the cable the phase isYou can use any other color:
• Any color different from neutral or earth.
• Black insulating tape.
• Brown insulating tape.
• Gray insulating tape.

The IP65 standard defines a specific level of protection provided by electrical and electronic equipment enclosures against the intrusion of solid objects and liquids.

This protection rating is governed by the international standard IEC 60529, where the first digit (6) indicates total protection against contact and the ingress of dust, ensuring the system is hermetically sealed against fine particles. The second digit (5) certifies resistance against low-pressure water jets from any angle using a 6.3 mm nozzle. This classification is essential for devices operating in industrial environments where cleaning, humidity, or airborne particles could compromise the integrity of internal circuits.

The adoption of this standard has transformed the deployment of critical infrastructure and IoT devices in outdoor environments. Its balance between manufacturing cost and sealing level allows outdoor displays and industrial sensors to maintain continuous operation without bulky secondary protection, optimizing thermal dissipation despite the enclosure's airtightness.

Ingress Testing

To achieve IP65 certification, equipment undergoes a vacuum test to ensure no dust particles enter. It is then subjected to a water spray test where the water volume must not impair the device's function or accumulate near critical components.

Main Advantages

• Total protection against high-density dust environments.
• Ability to withstand standard water cleaning procedures.
• Extended electronics lifespan against atmospheric corrosion.
• Versatility for outdoor and industrial installations.

Note: IP65 does not certify resistance to immersion or high-pressure water jets (IP66/67).

1. The ground wire can be identified in several ways:
• Green cable.
• C cablegreen smell with a yellow line.
• Cable without insulation.
2. The neutral wire will be blue.
3. The phase cable can be identified in several ways:
• Any color different from neutral or earth.
• Black insulation.
• Brown isolate.
• Gray insulation.