The use of LED bulbs has grown exponentially due to its great advantages. The LEDs are diodes that when passing the current emit light, these LEDs are controlled with a driver or power supply, providing a very stable power source and thanks to its dissipation system can achieve high performance and many hours of illumination .

• Duration of up to 50,000 hours, thanks to its dissipation system and voltControlled air.
• Fast on. The LED lights up much faster than a conventional light bulb.
• They do not emit almost heat, so they do not burn when touched.
• They contain no gas, no mercury, no pollutants.
• They consume 80% less than traditional light bulbs. Thanks to its continuous research, it is possible that this type of technology continues to evolve and reduce its consumption.
• LWhich emit, do not radiate ultraviolet or infrared rays.
• Low maintenance, since the LEDs do not melt, it only decreases its power. This dramatically lowers maintenance costs.
• Different shades, we can find different types of LEDs where we will find different shades of light, which can go from 2700K (yellow light) to 8000K (white light) without using filters.
• Sturdiness,If we compare with conventional light bulbs we find that LED technology withstands the vibrations much better. Ideal for what type of extreme installations.
• Emitting a direct light, the LED is characterized by being a directional light, so there is no loss of light.

L: Lumens
D: Duration in years
A: Saving
I: incandescent
H: Halogen
F: Fluorescent
D: Led Diode

Inside the different types of connectors for power supply we find one of the most common, the DC jack. Used in most connections in electronic devices such as routers, laptops, printers etc ... is the most used due to its easy assembly and connection. These connectors are mostly used in DC power supplies and installations.
The connector is cylindricalAnd we find its version in male and female format (A). The male connector is composed of the outer and inner metal part, where in each of them the energy travels, normally the inner part is used for the positive pole and the outside for the negative, but may vary according to manufacturer.
This type of connector is found in many diameters, the most common are 3.5mm and 5.5mm. Although we can andThere are several measures in terms of length and outer or inner diameter.
Its installation is simple, we can find several types of connectors, pair to weld or to screw with terminal block, it will depend on the user to choose the most suitable in its installation.
When purchasing the male connector to perform a repair we must know its diameter, length of the connector and internal diameter. If we proceed with aTo new installation only we must make sure that the male and female connector are of the same characteristics.