On-line UPS tower Optima-T10 1000 VA 1000 W

Uninterruptible Power Supply UPS (Uninterruptible Power Supply) with on-line double conversion technology, which uses a rectifier and current inverter offering an electrical signal free of harmonics, voltage peaks, protecting the installation where they are connected. Device designed to provide electrical power for a limited time to all devices that are connected to UPS. It has an internal AVR (Automatic Voltage Regulator) automatic voltage regulator, filtering current fluctuations to keep the alternating current that reaches the devices connected to the UPS stable.

specs

• UPS in tower format with C14 electrical network connector in black. Includes 1.8 meter C13 to schuko cable.
• Working voltage: 230V with 50 or 60Hz auto-detection. Auto-detection 4.2A.
• Work operations: On-line, battery mode, bypass mode, eco mode, frequency converter mode, fault mode.
• LCD display for supervision of the UPS operating mode.
• Front panel with start buttons ON/MUTE, Select to show the parameters of the UPS and OFF/ENTER.
• Acoustic alarm on startup, battery mode, overload, low battery and UPS failure.
• It has 2 female schuko ports for connecting devices.
• Capacity: 1000 VA / 1000 W load, possibility of connecting a battery bank to increase the autonomy of the UPS #UP13800.
• Boot time: 7 to 10 seconds.
• Autonomy: backup for loads >80% is limited to 4min. For loads between 70% the limit is 10min. Below 70% autonomy is not limited.
• Inside the UPS it has 3 batteries of 12 volts and 7AH.
• It has an RJ45 IN/OUT connector to protect devices with this interface.
• Possibility of installing SNMP module for remote management of the UPS via local network or Internet (not included).
• It has a USB connection and DB9 COM port for managing the UPS. Includes USB cable AM to BM of 1.8 meters.
• Software compatible with Windows, Mac OS X, Linux, Unix systems.
• Dimensions: 145 x 240 x 395 mm (width x height x depth).
• Complies with regulations: ISO 9001, ISO 14001 and RoHS.