https://cablematic.com/en/products/power-cable-iec-60320-18m-schuko-m2xc13-FB088/
Power Cable IEC-60320 1.8m (Schuko-M/2xC13)
- Power cable to connect 2 devices to the electrical network.
- The advantage of this cable is that with a single plug and a single cable, we have two power sockets of type IEC-60320-C13 (Female).
- It has the classic bifurcation in \ 'Y \'.
- The distance from the schuko-male to the bifurcation is 120 cm and from the fork to each of the power connectors C13 is 60 cm.
- Ideal for connecting the monitor andthe CPU with a single cable and the same plug.
![play_button]()
Watch video
More info
Watch video
2 yearswarranty
14 daysreturns
100%safe
- Power cable to connect 2 devices to the electrical network.
- The advantage of this cable is that with a single plug and a single cable, we have two power sockets of type IEC-60320-C13 (Female).
- It has the classic bifurcation in \ 'Y \'.
- The distance from the schuko-male to the bifurcation is 120 cm and from the fork to each of the power connectors C13 is 60 cm.
- Ideal for connecting the monitor andthe CPU with a single cable and the same plug.
Related products
Keywords
Did not find what you were looking for? These topic could help you
Purchased together regularly
More info
Power cable to connect 2 devices to the electrical network. The advantage of this cable is that with a single plug and a single cable, we have two power sockets of type IEC-60320-C13 (Female). It has the classic bifurcation in \ 'Y \'. The distance from the schuko-male to the bifurcation is 120 cm and from the fork to each of the power connectors C13 is 60 cm. Ideal for connecting the monitor andthe CPU with a single cable and the same plug. Three-pole cable of 1.8m of total length and that complies with the community regulations in terms of diameter (6.5-6.8 mm).
- Gross Weight: 330 g
- Product size (width x depth x height): 30.0 x 6.5 x 5.5 cm
- Number of packages: 1
- Packages size: 30.0 x 6.5 x 5.5 cm
Technical terms
- IEC
- Schuko
- Electrical cables according to number of conductors
The IEC 60320 standard defines an international set of non-locking appliance couplers for connecting power supply cords to electrical equipment up to 250 V.
The specification ensures electrical and mechanical interchangeability across a wide range of devices. Connectors are designated by even and odd numbers, where odd numbers (C7, C13, C19) refer to the female connector and even numbers (C8, C14, C20) to the male appliance inlet.
| Type | Current (A) | Ground | Typical Use |
|---|---|---|---|
| C7 / C8 | 2.5 A | No | Consumer electronics (Shotgun). |
| C13 / C14 | 10 A / 15 A | Yes | PC, IT equipment. |
Widespread adoption of this standard has enabled global hardware manufacturing efficiency, allowing a single power supply unit to work worldwide by simply swapping the localized cord. In modern data center architectures, the shift toward C19/C20 standards is vital to handle the increased power density of high-performance servers.
Key Features
- Global standardization and compliance.
- Class I and Class II equipment support.
- High thermal tolerance variants available.
Standardized by the International Electrotechnical Commission.
