04/24/2024 4:51 a.m.
https://cablematic.com/en/products/tcpip-active-extender-by-coaxial-and-utp-cat5-sender-and-receiver-ip03-SJ002/
https://cablematic.com/en/products/tcpip-active-extender-by-coaxial-and-utp-cat5-sender-and-receiver-ip03-SJ002/
TCP/IP active extender by coaxial and UTP Cat.5 sender and receiver IP03
REF: SJ002
Specifications
- Transfers Ethernet signal at a distance of up to 1200 m using Cat.5 UTP cable, or a distance of 2000 m using RG59 coaxial cable.
- Transmission speed: 50Mbps (300m), 40Mbps (600m) and 20Mbps (1200m).
- Active. Each module requires power supply (DC5V, 2A). Two power sources are included.
- Each module has cswitch to configure as Tx or Rx.
- LED indicators of POWER, RX and LINK.
Watch video
PVP
€428.48
Price including VAT:
€428.48
PVD
€365.32
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 years
warranty
warranty
14 days
returns
returns
100%
safe
safe
We will notify you when it is back in stock.
Specifications
- Transfers Ethernet signal at a distance of up to 1200 m using Cat.5 UTP cable, or a distance of 2000 m using RG59 coaxial cable.
- Transmission speed: 50Mbps (300m), 40Mbps (600m) and 20Mbps (1200m).
- Active. Each module requires power supply (DC5V, 2A). Two power sources are included.
- Each module has cswitch to configure as Tx or Rx.
- LED indicators of POWER, RX and LINK.
More info
Ethernet TCP/IP active signal extender through Cat.5 cable. It consists of two modules that have two RJ45-Female connectors and two BNC-Female connectors. Both modules are interconnected via Cat.5 UTP cable or RG59 coaxial cable. The UTP Cat.5 cable signal for TCP/IP signal transmission has a limitation of 100-125 m. With this solution a length of 1200 m of UTP Cat.5 cable is possible, and a length of 2000 m con R59 cable.
Specifications
Specifications
- Transfers Ethernet signal at a distance of up to 1200 m using Cat.5 UTP cable, or a distance of 2000 m using RG59 coaxial cable.
- Transmission speed: 50Mbps (300m), 40Mbps (600m) and 20Mbps (1200m).
- Active. Each module requires power supply (DC5V, 2A). Two power sources are included.
- Each module has cswitch to configure as Tx or Rx.
- LED indicators of POWER, RX and LINK.
- Mounted in black metal casing.
- Size of each module: 109 x 121 x 30 mm.
- Weight: 260 g.
- Gross Weight: 600 g
- Product size (width x depth x height): 11.0 x 12.0 x 3.0 cm
- Number of packages: 1
- Packages size: 22.5 x 17.8 x 8.0 cm
Technical terms
- Types of network cables (UTP, FTP, STP)
- BNC
- RJ45
- Categories network cables
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)