USB Module with 8 digital inputs and 8 digital outputs (IRP-C29U)

Device with USB connection interface has 8 opto-isolated digital inputs and 8 digital outputs. Each channel has a connection terminals and a LED status indicator channel. The input channels are equipped with an opto-isolation of up to 3750 Vms DC. Supports communication protocols Modbus ASCII and a full set of commands, dual watch-dog and auto-reset. The module canbe bi-directionally remote controlled by a PC interchangeably using the ASCII protocol or Modbus RTU.

Specs

• Directly through the USB port Power.
• When connecting the module to the USB port of the PC is configured in the control panel as an additional serial port.
• Supports ASCII and Modbus RTU protocols.
• Supports transmission ratesData 1.2 Kbps to 115.2 Kbps
• The 8 digital input channels can be used as counters (0 to 65535 or Dec. Hex. 0000 to FFFF).
• Optical isolation digital input signals up to 3750 Vrms.
• Dual Watchdog: in the firmware and traffic between your computer.
• Status LEDs for each input and output channels (total 16 LEDs).
• Supports DIN rail mountingor directly on the wall.
• It has dip-switch configuration and self-test.
• It has terminals for the realization of the input connections and digital output.
• Input logic level 0: ± 1 V (max).
• Input logic level 1: ± 4 V to ± 30 V.
• Input impedance 3 Kohm.
• Counter Input Frequency: 100 Hz
• Distance Maximum input: 500m.
• Maximum output voltage: ± 30 V.
• Maximum output current: 100 mA.
• Consumption: 1.2W
• Size: 151 x 75 x 26 mm.
• Weight: 400 g.
• Mounted on metal chassis black.