03/29/2024 12:22 a.m.
https://cablematic.com/en/products/waterproof-box-with-rectangular-surface-ip54-310x230x130mm-AE212/
Waterproof box with rectangular surface IP54 310x230x130mm
REF: AE212
Specifications
  • Waterproof box with a rectangular surface for electrical connections.
  • It has twelve cable glands that allow cables of various sizes to be installed.
  • Painted in gray color RAL 7035.
  • It has IP65 environmental protection against dust, humidity and water.
play_button Watch video
More info
PVP
19.91
Price including VAT: 19.91
PVD
17.59
2 years
warranty
14 days
returns
100%
safe

Out of stock

We will notify you when it is back in stock.
More info
Specifications
  • Waterproof box with a rectangular surface for electrical connections.
  • It has twelve cable glands that allow cables of various sizes to be installed.
  • Painted in gray color RAL 7035.
  • It has IP65 environmental protection against dust, humidity and water.

Keywords

Did not find what you were looking for? These topic could help you

More info

Watertight surface box for electrical connections and derivations. IP65 environmental protection, which allows electronic mechanisms to be installed outside. Made of highly resistant ABS plastic with different shapes and sizes to adapt to the needs of each installation.

specs

  • Waterproof box with a rectangular surface for electrical connections.
  • It has twelve cable glands that allow cables of various sizes to be installed.
  • Painted in gray color RAL 7035.
  • It has IP65 environmental protection against dust, humidity and water.
  • IK 10 resistance level against impacts.
  • The cover snaps on.
  • Includes 4 screws for closing the lid.
  • Ideal for housing electrical connections and mechanisms.
  • Installation temperature from -25 to 60ºC.
  • Made of high quality ABS plastic.
  • Measurements (height x width x depth): 310 x 230 x 130 mm.
  • Gross Weight: 1.085 kg
  • Product size (width x depth x height): 23.0 x 13.0 x 31.0 cm
  • Number of packages: 1
  • Packages size: 24.0 x 22.3 x 13.7 cm
  • Master-pack: 1

Videos

play_button Watch video

Technical terms

  • IP65
  • IP Protection
  • Types of mechanisms and functions
  • ABS
IP65
IP65 Although it seems very complicated nomenclature IP standards is only one division in two digits, where each digit indicates that it is being served to meet these regulations. For the first digit would be: 0 No protection 1 element to be used for testing (sphere 50 mm in diameter) should not get to go completely. 2 element to be used for the test (area of ??12.5 mm diameter) should not get to go completely. 3 element to be used for testing (sphere 2.5 mm in diameter) must not come at all. 4 element to be used for the test (sphere of 1 mm in diameter) must not come at all. 5 ingress of dust can not be avoided, but it must not enter an amount that interferes with the proper functioning of equipment. 6 polvo should not come under any circumstances in the case of the second digit: Level Protection Against Expected Results Test Method 0 The water enters the equipment quickly. 1 The equipment is placed in their usual work. Should not enter the water when it is dropped from 200 mm height from the team for 10 minutes (at a rate of 3-5 mm³ per minute) 2, the equipment is put into lugar normal work. You should not enter the water when the leaves fall, for 10 minutes (at a rate of 3-5 mm³ per minute). This test should be performed four times at a rate of one for every 15 ° rotation both vertically and horizontally, starting each time the normal position. 3 The equipment is placed in their usual work. You should not enter the water spray at an angle up to 60 ° right and leftvertically to an average of 10 liters per minute and a pressure of 80-100kN/m for a time not less than 5 minutes. 4 The equipment is placed in their usual work. You should not enter the water thrown from any angle to an average of 10 liters per minute and a pressure of 80-100kN/m for a time not less than 5 minutes. 5 The equipment is placed in their usual work. Should not enter waterthrown jet (from any angle) by means of a nozzle 6.3 mm in diameter, at an average of 12.5 liters per minute and a pressure of 30 kN/m for a time not less than 3 minutes and a no closer than 3 meters. 6 The equipment is placed in their usual work. You should not enter water squirted (from any angle) through a nozzle diameter of 12.5 mm, an average of 100 liters per minute and a pressure of 100 kN/m² for at least three minutes at a distance of not less than 3 meters. 7 The object must endure without any filtration complete immersion in 1 meter for 30 minutes. 8 electrical/electronic equipment must withstand (without filtration) complete and continuous immersion depth and during the time specified by the manufacturer of the product with the agreement ofclient, but provided they are more severe than those specified for the value 7. For IP65 should meet the following standard conditions. Would hold cirscuntancias be dusty and prevent to enter under any cirscuntacia, and bear no powerful jets of water.

Do you have any question about this product?