03/28/2024 1:37 p.m.
https://cablematic.com/en/products/cat5-extender-utp-active-video-receiver-for-tta111vr-SI034/
Cat.5 Extender UTP active video receiver for TTA111VR
REF: SI034
Specifications
  • Active composite video extender.
  • Small module mounted in a plastic case of size: 5.8 x 4.3 x 45 mm.
  • Receiver module (video-OUT, UTP-IN).
  • It has a BNC-Female connector for composite video output.
  • It has a Terminal Block for connection to twisted pair cable.
play_button Watch video
More info
PVP
44.43
Price including VAT: 44.43
PVD
40.06
Shipping costs: 30,75 *
GB-SE1 1ES
Delivery times are approximate. Cablematic is not responsible for delays.
2 years
warranty
14 days
returns
100%
safe

In stock
Only 2 units

More info
Specifications
  • Active composite video extender.
  • Small module mounted in a plastic case of size: 5.8 x 4.3 x 45 mm.
  • Receiver module (video-OUT, UTP-IN).
  • It has a BNC-Female connector for composite video output.
  • It has a Terminal Block for connection to twisted pair cable.

More info

Active composite video extender through twisted pair cable. Twisted pair cable is easier to install, cheaper and allows longer transmission distances without loss of quality.

Specifications
  • Active composite video extender.
  • Small module mounted in a plastic case of size: 5.8 x 4.3 x 45 mm.
  • Receiver module (video-OUT, UTP-IN).
  • It has a BNC-Female connector for composite video output.
  • It has a Terminal Block for connection to twisted pair cable.
  • Supplied with 12VDC (0.5A) power supply.
  • Transmission range through UTP cable: 1500m (color) and 2400m (B/W).
  • It has a 5-position gain selector to obtain the highest possible image quality.
  • It has a potentiometer to adjust the brightness of the image.
  • Equipped with ground connection and ON indicator LEDs.
  • Possibility of being used together with model #SI33.
  • Gross Weight: 192 g
  • Product size (width x depth x height): 5.8 x 4.3 x 4.5 cm
  • Number of packages: 1
  • Packages size: 15.0 x 8.5 x 6.7 cm

Videos

play_button Watch video

Technical terms

  • Types of network cables (UTP, FTP, STP)
  • BNC
  • CVBS
  • Categories network cables
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

Do you have any question about this product?