A Peripheral Component Interconnect (PCI, "Peripheral Component Interconnect") is a bus (picture 2) computer standard for connecting peripheral devices directly to your motherboard. Dimensions of the cards - PCI (standard) 107 mm x 312 mm (picture 1) - PCI Low Profile Height: 36.07 mm x 64.41 mm Depth: 119.91 mm to 167.64 mm - Mini PCI Mini PCI cards have a Maximum consumption2W.

ExpressCard is a hardware standard replacing the PCMCIA/PC Card/CardBus cards, both developed by the Personal Computer Memory Card International Association. The host device supports PCI-Express and USB 2.0 connectivity in the ExpressCard slot, and each card uses the mode of connectivity the designer considers more appropriate for the task. The cards can connect to the computer on without RESETiarlo (support Hot swap or hot plug). It is an open standard of the ITU-T and its definition can be obtained from the official website of ExpressCard. You can connect to this bus, different types of peripherals such as Wi-Fi cards, Bluetooth, TV cards, FireWire, etc.

Gbps (Gb/s, Gbit/s) is the speed with which information is transmitted. It is normally used to measure the speed information in the ADSL/fiber addresses transmitted.

• 1 Gb/s is equivalent to 1,000,000,000 b/s.
• 1 Gb/s is equivalent to 1000000 kb/s.
• 1Gb/s equals 1000 Mb/s.

There are several cabinet heights according to the needs of the installation, this height can be measured in rack units (U).

Each rack unit or U is the distance between each horizontal separation to place the different accessories inside the rack. This distance is 1.75 inches that is equal to 4.4445 cm high.

For example, if we say that a rack is 8U we will understand that it has 8 units to install device orAccessories of 4.44 cm in height.

Normally these accessories, like trays, guides, strips, etc. Occupy a unit of U (1U), but we can find that other devices or accessories occupy more units, for example can be a rack box to install a PC, a UPS, etc. It can be said that there is also a half unit of U (0.5U), in this case, two units could be installed in a rack unit.

As far as I knowEndo the units of rack that occupy the devices that we are going to install we will know the height that we need for our rack.

The size of the rack unit (U) is based on the standard specification for racks defined in EIA-310.