DMX512, also known as DMX to dry is the most widely used protocol in lighting today. The lighting allows lighting control in shows. The DMX can control multiple light emitting visual elements, such as cannons, strobe lights and others, from a single issuer.

The XLR or Cannon is a type of connector that usually connect balanced lines. In fact, it is more balanced connector used for professional audio applications, and is also the standard connector used in entertainment lighting equipment to transmit the digital control signal "DMX". His nickname cannon, for which he is best known in Spain is that the first to be used in this country, were made by theITT/CANNON brand, and carried "cannon" stamped on the chassis. It has three pin plug and European standard for audio signals is as follows: for the earth or mesh. for one-phase signal, known as a living or hot to the back or push-pull signal, known as return or cold. It is available in version 3-pin and 5-pin.

The impedance (Z) is a measure of opposition that a circuit to a current when a voltage is applied. The impedance extends the concept of resistance circuits alternating current (AC), and has both magnitude and phase, unlike resistance, which has only magnitude. When a circuit is powered with direct current (DC), there is no distinction between the impedance and resistance; the latter can be thought csa impedance with zero phase angle.

DMX512, often shortened to DMX (Digital Multiplex), is an electronic protocol used in lighting control of the light show, enabling communication between the teams control their own lights and light sources.

Depending on the need for installation and type of base, trolley or chair, we can find various types of fixation. Among the most common we find:

A - Through hole: It has a hole in which a screw or stem is inserted. It is a very simple installation system. Ideal for wheels that should not support a lot of load.
B - Threaded stem: It has a threaded stem or nut, it is fixed to the surface with a nut. It is usually the most used fastening system.
C - Angular plate: They are usually less used fastening systems, they have lateral plates to fix on the base.
D - Plate: It has a rectangular or square plate on its surface, it includes 4 or more fastening holes to the base, it is one of the most common.
E - Smooth stem: The stem without thread is inserted into the female of the base, we can find it in the typical office chairs with wheels, TV furniture etc ...