03/29/2024 1:13 a.m.
https://cablematic.com/en/products/fiber-optic-converter-100-mbps-single-mode-from-sc-to-rj45-at-25km-UF002/
Fiber optic converter 100 Mbps single mode from SC to RJ45 at 25Km
REF: UF002
Specifications
  • Converter from Fast Ethernet 100Base-TX to Fiber Optic 100Base-FX complying with the 802.3, 802.3x and 802.3u regulations.
  • It has an RJ45 type UTP/STP connector for the 100Base-TX port (auto MDI/MDIX) and an SC connector for the 100Base-FX port.
  • It allows operation in Full-Duplex (200Mbps) and Half-Duplex (100Mbps) modes.
  • Maximum distance of up to 25Km/1310nm through single-mode fiber (mono-mode).
  • Single-mode (SM) fiber optic cable: 8.3/125, 8.7/125, 9/125 and 10/125m.
play_button Watch video
More info
PVP
36.29
Price including VAT: 36.29
PVD
32.09
2 years
warranty
14 days
returns
100%
safe

Out of stock

We will notify you when it is back in stock.
More info
Specifications
  • Converter from Fast Ethernet 100Base-TX to Fiber Optic 100Base-FX complying with the 802.3, 802.3x and 802.3u regulations.
  • It has an RJ45 type UTP/STP connector for the 100Base-TX port (auto MDI/MDIX) and an SC connector for the 100Base-FX port.
  • It allows operation in Full-Duplex (200Mbps) and Half-Duplex (100Mbps) modes.
  • Maximum distance of up to 25Km/1310nm through single-mode fiber (mono-mode).
  • Single-mode (SM) fiber optic cable: 8.3/125, 8.7/125, 9/125 and 10/125m.

Keywords

Did not find what you were looking for? These topic could help you

More info

Converter from Fast Ethernet 100Base-TX to Fiber Optic 100Base-FX complying with the 802.3, 802.3x and 802.3u regulations. It has an RJ45 type UTP/STP connector for the 100Base-TX port (auto MDI/MDIX) and an SC connector for the 100Base-FX port. It allows operation in Full-Duplex (200Mbps) and Half-Duplex (100Mbps) modes. Maximum distance of up to 25Km/1310nm through single-mode fiber (mono-mode). Single-mode (SM) fiber optic cable: 8.3/125, 8.7/125, 9/125 and 10/125m. Size 97 x 70 x 25mm. Includes power supply.
  • Gross Weight: 400 g
  • Product size (width x depth x height): 7.0 x 9.7 x 2.5 cm
  • Number of packages: 1
  • Packages size: 20.5 x 16.0 x 5.5 cm
  • Master-pack: 20

Videos

play_button Watch video

Technical terms

  • Types of network cables (UTP, FTP, STP)
  • MDIX
  • RJ45
  • Categories network cables
  • Rack unit (U)
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)

Do you have any question about this product?