05/06/2024 3:43 a.m.
https://cablematic.com/en/products/kit-power-over-ethernet-poe-injector-splitter-RA051/
https://cablematic.com/en/products/kit-power-over-ethernet-poe-injector-splitter-RA051/
Kit Power Over Ethernet (PoE Injector + Splitter)
Kit Power Over Ethernet (PoE Injector + Splitter)
REF: RA051
OUTLET
Specifications
- Kit that consists of two modules of reduced size: the injector and the splitter.
- The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8).
- Together with the INJECTOR, a 15VDC power supply is supplied to inject the current.
- By tando it has power input, RJ45 input (LAN) and RJ45 output (LAN +DC).
- The SPLITTER (or separator) again separates the data and the DC current (LAN + DC) that will feed the device.
PVP
€40.16
€36.14
Price including VAT:
€36.14
PVD
€35.30
€31.77
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
14 daysreturns
OUTLET
We will notify you when it is back in stock.
Specifications
- Kit that consists of two modules of reduced size: the injector and the splitter.
- The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8).
- Together with the INJECTOR, a 15VDC power supply is supplied to inject the current.
- By tando it has power input, RJ45 input (LAN) and RJ45 output (LAN +DC).
- The SPLITTER (or separator) again separates the data and the DC current (LAN + DC) that will feed the device.
Related products
Keywords
Did not find what you were looking for? These topic could help you
Purchased together regularly
More info
Kit that consists of two modules of reduced size: the injector and the splitter. The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8). Together with the INJECTOR, a 15VDC power supply is supplied to inject the current. By tando it has power input, RJ45 input (LAN) and RJ45 output (LAN +DC). The SPLITTER (or separator) again separates the data and the DC current (LAN + DC) that will feed the device. The maximum distance between these two devices is 100m, which is defined by the IEEE 802.3 standard itself. It allows 3 different voltages: 5V/2A, 7.5V/1.5A and 12V/1A, which adapt to most devices and selectable by means of a switch located in the SPLITTER. Works with TIA/EIA-568, Cat.5/5e, 4-wire cabless for 10Base-T or 100Base-TX. The SPLITTER module therefore has input RJ45 (LAN + DC), power output (DC) and output RJ45 (LAN). Together with the SPLITTER, there are 3 15cm power cables with different DC connector diameters, and a 15cm Cat.5e hose. Size of the modules of 64x42x21mm.
- Gross Weight: 500 g
- Number of packages: 1
- Master-pack: 20
Technical terms
- Types of network cables (UTP, FTP, STP)
- PoE
- RJ45
- Categories network cables
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)
